Our peel-off sticker wallpaper is easy to install - just peel off the backing and stick it on - and can be neatly applied to and removed from existing vinyl wallpaper.
In this article, we will introduce detailed instructions on how to apply removable sticker wallpaper, including precautions regarding the base material and how to calculate the required amount.
If you want to check out the video on how to apply it right away, click here!
Before you begin! Things to check before you start
- If the base is a functional wallpaper with a coating applied to the surface to prevent dirt or water, it may not stick well.
- Depending on the condition of the material, it may damage the base or leave adhesive residue when removed. Please test it in an inconspicuous place before applying.
- We recommend application on walls with a smooth and firm surface.
How much do I need? How to calculate the amount needed
Our removable non-woven wallpaper comes in two lengths: 49cm W x 250cm L or 49cm W x 300cm L.
You can purchase as many panels as you need.
Measure the width (cm) of the wall you want to use and divide it by the width of the wallpaper (49cm) to find the number of panels you need.
Please round up decimals to the next whole number when determining how many panels you need.
(Width of the wall) / (Width of the wallpaper) = (Number of panels needed) *Round up to the next whole number Example Case Wall Width of 360cm / 49cm = 7.3 → 8 panels
How to apply peelable sticker wallpaper (fleece)
What you need
How to apply
If you want to watch a video about the process, click here ! (※This will take you to Youtube)
- Cut the wallpaper along the cutting lines. Leave the panel number uncut.
- Check that the serial numbers written next to <↑↑ TOP ↑↑> are in order.
- Peel off a small portion of the backing paper and apply the wallpaper starting from the left edge of the wall.
Paste <↑↑ TOP ↑↑> on top, leaving some extra space above and below.
- Peel off the backing paper and stick it on.
- Use a smoother to remove all the air pockets from the surface before applying the wallpaper.
- Use a smoother to smooth out the excess paper on top.
- Use the smoother as a guide and cut off the excess with a cutter.
- Cut off the excess at the bottom as well.
- Attach the second piece of wallpaper, aligning the edges of the wallpaper. If you have a pattern, please match it. Paste the wallpaper so that it overlaps by about 0.5mm so that there are no gaps at the joints due to expansion and contraction of the wallpaper.
- Use a seam roller to press down the seams firmly.
- Continue pasting the third and subsequent sheets in the same manner.
Finish!!
Product number used: Peelable sticker wallpaper Monotone Rib Wood Smoke Wood
Supplementary information regarding application
About "gaps" that occur at joints
After installation, a gap of approximately 0.1 to 0.2 mm may be created at the seam (seam of wallpaper) due to shrinkage of the wallpaper.
This is called "gapping."
In particular, when dark wallpaper or plain wallpaper is pasted on a white base, gaps are likely to be noticeable, so the seams are should be placed closely together.
Recommended repair and reinforcement for sticker-type fleece wallpaper
When sticker-type fleece wallpaper starts to peel off or you want to reinforce the glue , we recommend using peel-off wallpaper glue (Poteglue) .
Apply glue directly to the base of the areas that have peeled off or that you want to strengthen, and reapply the wallpaper.
We recommend using a brush for applying to small areas, and a roller for applying to large areas.
How to remove peel-off sticker wallpaper
- Slowly peel off the wallpaper starting from one edge.
- If any glue remains on the wall, wipe it off with mild soap diluted in water.
5 wallpaper brands we recommend to match your own unique style
Introducing 5 brands of removable sticker wallpaper that you can choose according to the style of the furniture in your room and the atmosphere you'd like to achieve!
SLOW TiME
Slow Time
Standard design that is easy to match with natural interiors. A brand recommended for people who like natural materials and nuanced colors.
Room No.0
Room Number Zero
Minimal monochrome design. A brand recommended for people who aim to create a stylish, hotel-like space that doesn't feel like a living space.
Mon Sucrier
Mont Sucrier
An elegant and gorgeous design with the theme of "cute for adults". This brand is recommended for people who like cute accessories and a little fairy tale atmosphere.
What’s poppin?
What's poppin'
A brand where people who like pop and colorful things can create the ``best'' interiors. With a unique design like no other, it's sure to look great on SNS!
Retrotore
A nostalgic design that allows you to fully immerse yourself in a retro worldview. A brand recommended for people who like retro furniture, home appliances, miscellaneous goods, and a vintage atmosphere.
